Results 1 to 3 of 3

Thread: Xperia testpoint instructions and pictures

  1. #1
    Moderator Blagus's Avatar
    Join Date
    Mar 2010
    Location
    Europe
    Posts
    972
    Thanks
    12
    Thanked 165 Times in 141 Posts

    Default Xperia testpoint instructions and pictures

    Some people had problems with connecting testpoint to Xperia phones.
    A lot of people are regular users without unlocking experience, so they get confused when told about testpoint.

    So here are the instrucions:

    1) Installing drivers
    You can find them in C:\Program Files\Omnius for SE\Drivers
    a) First, start unlock so you can see testpoint picture. Abort unlock and connect according to the instructions in step 2.
    b) When asked about drivers for new device, point to the folder mentioned above. Do not close the "new device" window!
    c) Proceed to the actual step 2.

    2) Unlocking
    If the testpoint pin is accessible when the battery is inserted (Arc, Neo):
    * Turn off the phone, remove battery, wait 5 seconds, put it back.
    * Take something conductive. For example, tweezers, paper clip or a wire.
    * Locate the testpoint - start unlock in Omnius and use the picture as reference.
    * Use metal cover on SIM card slot as ground. Connect testpoint pin and ground, press power button, disconnect testpoint.
    * Plug in the USB cable and unlock will start.

    If the testpoint pin is not accessible when the battery is inserted (Play, Mini):
    * Turn off the phone, remove battery and remove USB cable. Do not return battery.
    * Take something conductive. For example, tweezers, paper clip or a wire.
    * Locate the testpoint - start unlock in Omnius and use the picture as reference. When you see the picture, abort unlock.
    * Plug in the USB cable, while battery is removed.
    * Use metal cover on SIM card slot as ground. Connect testpoint pin and ground, press power button, disconnect testpoint.
    * Insert battery, and then disconnect USB cable.
    * Start unlock again and plug in the USB cable, unlock will start.

    Warning: Make sure you don't ground wrong pin! This can result in erasing important data and prevent you from turning on the phone!

    Blagus
    Last edited by Blagus; 31. January 2012 at 20:58. Reason: updated

  2. The Following 9 Users Say Thank You to Blagus For This Useful Post:


  3. #2
    Moderator satch1234's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    1,785
    Thanks
    71
    Thanked 364 Times in 292 Posts

    Default Testpoint pictures

    Testpoint pictures for Xperia phones. You can connect it with tweezers or build cable with crocodile clip (to connect it to battery GND, for example).

    Xperia Arc (LT15):
    LT15 ARC TP.jpeg


    Xperia Neo (MT15):
    mt15_testpoint.jpg


    Xperia Play (R800):
    r800_testpoint.JPG


    Xperia Mini (ST15):
    st15_testpoint.jpg


    Xperia Mini Pro (SK17):
    SK17_testpoint.jpg


    Xperia Active (ST17):
    st17_testpoint.jpg


    Xperia Ray (ST18):
    st18_testpoint.jpg


    Xperia Pro (MK16):
    mk16_testpoint.jpg
    Last edited by Blagus; 2. November 2011 at 20:58.

  4. The Following 5 Users Say Thank You to satch1234 For This Useful Post:


  5. #3
    Moderator satch1234's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    1,785
    Thanks
    71
    Thanked 364 Times in 292 Posts

    Default

    Xperia x10mini(E10)
    e10_board.jpg

    Xperia x8(E15)
    e15_board.jpg

    Xperia x10
    x10_board.jpg

    Xperia x10 mini pro(u20)
    u20_board1.jpg

    Download pictures,good quality: http://www.mediafire.com/?jhs6toi88s6e912



    copy from setool
    Last edited by satch1234; 12. November 2011 at 14:09.

  6. The Following 7 Users Say Thank You to satch1234 For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •