Results 1 to 4 of 4

Thread: Omnius cannot connect to server?!

  1. #1
    Junior Member
    Join Date
    Aug 2010
    Posts
    1
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Unhappy Omnius cannot connect to server?!

    Hi there I try to revive one K800i but wich has not start referring to the red light blinking now the problem is that I get that error

    Code:
    Action journal
    16:48:54   Unlock network lock by reset
    16:48:54   Unlocks the phone network lock by reset (up to OTP CID 53).
    16:48:54   Operating system: Microsoft Windows 7 Home Premium Edition (build 7600), 64-bit
    16:48:54   Application version: 0.10.2524
    16:48:54 . The action name is 'Unlock'
    16:48:54   Selected phone type: K800
    16:48:54   Selected connection method: USB ROM
    16:48:54 i Instructions
    16:48:54 i 1. Make sure the phone battery is charged to at least 50%.
    16:48:54 i 2. Switch off the phone!
    16:48:54 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    16:48:54 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    16:48:54 . The action started waiting for the user
    16:49:09 . The action finished waiting for the user
    16:49:09   Connecting via Generic EMP USB Flash Device (USB2)...
    16:49:09   Device driver version: 2.2.0.5
    16:49:09   Entering baseband CPU service mode...
    16:49:09   Detected chipset: DB2020 '9900
    16:49:09   Boot mode: ROM
    16:49:09   Sending loader...
    16:49:09   Waiting for loader response...
    16:49:09   Flash chip manufacturer: Intel®
    16:49:09   Flash chip ID: 897E
    16:49:09   IMEI: xxxxxxxxxxxxxxx
    16:49:09   OTP CID: 49
    16:49:10   OTP area status: Locked
    16:49:10   Product type: Retail
    16:49:10   Effective CID: 53
    16:49:10   Effective color: Red
    16:49:10   Restarting the phone...
    16:49:12 i Instructions
    16:49:12 i 1. Make sure the phone battery is charged to at least 50%.
    16:49:12 i 2. Switch off the phone!
    16:49:12 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    16:49:12 i 4. Press and hold buttons 2 and 5, then connect the cable to the phone!
    16:49:37   Connecting via Generic EMP USB Flash Device (USB2)...
    16:49:37   Device driver version: 2.2.0.5
    16:49:37   Entering baseband CPU service mode...
    16:49:37   Detected chipset: DB2020 '9900
    16:49:37   Boot mode: ROM
    16:49:37   Sending loader...
    16:49:37   Waiting for loader response...
    16:49:38   Establishing connection to the server...
    16:49:39 e Unable to connect to the server
    16:49:40 e Failed!
    16:49:40 . The action entered shutdown phase
    16:49:40 . The action reported failure
    
    Error code
    # 49B8871780EFBECE
    
    Error details
    ---
    56 65 D2 09 80 D8 7C 95 16 9D 20 71 1A B0 84 4A 
    42 35 F6 A6 9E E9 8C B1 81 37 35 FA F8 6E 6C E3 
    92 2B 48 79 F2 88 9C DD AA DD EE 20 C6 DF A4 39 
    92 64 66 BC 2C 68 AC A5 3A D7 69 6F FD EA E2 9C 
    72 C5 D8 3D D3 4A CF A0 04 6C 60 21 A6 CF 3C 2D 
    E2 6B 18 87 A2 D7 9A A8 E6 7D 90 21 16 6E 2C DD 
    52 65 01 0B 60 55 DC B5 76 43 80 81 86 65 FE 0D 
    04 8E 
    ---
    and it doesn't go anywhere I disconnect the firewall - deactivate the antivirus and nothing is changing, any other ideas?

    many thanks...

  2. #2
    Moderator satch1234's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    1,785
    Thanks
    71
    Thanked 362 Times in 292 Posts

    Default

    Read the sticky thread.
    Last edited by satch1234; 26. November 2010 at 14:42. Reason: link removed(bad)

  3. The Following User Says Thank You to satch1234 For This Useful Post:


  4. #3
    Junior Member
    Join Date
    Aug 2010
    Location
    Moscow
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Hi, I have this problem! I have no firewall.

    Code:
    Action journal
    00:10:20   Flash
    00:10:20   Allows to change languages supported by the phone and upgrade its firmware.
    00:10:20   Operating system: Microsoft Windows 7 Ultimate Edition (build 7600), 64-bit
    00:10:20   Application version: 0.10.2524
    00:10:20 . The action name is 'Flash'
    00:10:20   Selected phone type: Elm™
    00:10:20   Selected connection method: USB EROM
    00:10:20 i Instructions
    00:10:20 i 1. Make sure the phone battery is charged to at least 50%.
    00:10:20 i 2. Switch off the phone!
    00:10:20 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
    00:10:20 i 4. Press and hold the button C, then connect the cable to the phone!
    00:10:20 . The action started waiting for the user
    00:10:25 . The action finished waiting for the user
    00:10:25   Connecting via SEMC USB Flash Device (USB2)...
    00:10:25   Device driver version: 2.2.0.5
    00:10:25   Entering baseband CPU service mode...
    00:10:25   Detected chipset: DB3350 'F100
    00:10:26   Boot mode: EROM
    00:10:26   IMEI: 35987403509952
    00:10:26   OTP CID: 80
    00:10:26   OTP area status: Locked
    00:10:26   Product type: Retail
    00:10:26   Effective color: Red
    00:10:26   Establishing connection to the server...
    00:10:26 e Unable to connect to the server
    00:10:26 e Failed!
    00:10:26 . The action entered shutdown phase
    00:10:26 . The action reported failure
    
    Error code
    # 830D4ECD20BD17BB
    
    Error details
    ---
    7F 58 23 82 25 89 67 02 F7 22 DB BA A3 DA F1 AC 
    1F 8C 53 EF BB 58 49 98 22 67 C6 66 7D 01 A1 DA 
    BF B6 74 96 F0 7D 57 1F 57 4C 7B 94 03 F0 51 9C 
    EF 4E 33 E7 B5 69 A9 4E 87 56 59 9B 63 5B 51 E7 
    E1 64 0D 48 D1 29 44 6F E7 55 1B 7A 9D 1E 4F 76 
    B1 8C 43 4E 7B 68 A7 7F 19 84 95 E4 93 E1 9F 1B 
    7F 7C 9A 02 FB 04 B9 62 17 82 45 5A 3D D4 F9 62 
    E1 57 
    ---

  5. #4
    Moderator satch1234's Avatar
    Join Date
    May 2010
    Location
    EU
    Posts
    1,785
    Thanks
    71
    Thanked 362 Times in 292 Posts

    Default

    Try again.I just tested and it is working fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •